Coated fabric properties, boot configuration options, material origin, shipping, and lead time — everything needed to plan an installation.
| Property | Test Method | Requirement |
|---|---|---|
| Material | — | CSPE / Polyester |
| Adhesion | ASTM D751-89 Par. 43.1.2 | Minimum 10.00 lbs/in. |
| Colour | Visual | Light Grey |
| Colour Check | Manufacturer Test Method | Pass |
| Gauge | ASTM D751-89 Par. 9 | Record Only |
| State of Cure | Manufacturer Test Method | Pass |
| Taber Abrasion | ASTM D3389-94, Method A | Pass |
| Tongue Tear – Fill | ASTM D751-89 Par. 29 | Minimum 40.00 lbs |
| Tongue Tear – Warp | ASTM D751-89 Par. 29 | Minimum 50.00 lbs |
| Weight | ASTM D751-89 Par. 10.2 | 35 oz/yd² |
| Width | ASTM D751-89 Par. 8 | 60 inches, untrimmed |
| Style | Configuration | Location | Valve Extension |
|---|---|---|---|
| Standard with Ring Collar Boot | Conical / Concentric | Casing wall or roof/floor | With or without split collar |
| Standard with Ring Collar Boot | Conical / Eccentric | Casing wall or roof/floor | With or without split collar |
| Witches Hat with Brim Boot | Conical / Concentric | Casing wall or roof/floor | With or without split collar |
| Witches Hat with Brim Boot | Conical / Eccentric | Casing wall or roof/floor | With or without split collar |
| Cylindrical | N/A | Casing wall or roof/floor | N/A |
| Special Transition | — | — | — |
| Ring Materials | Location | Remark |
|---|---|---|
| Carbon steel or stainless steel | Casing wall or roof/floor | Standard supply for new or upgraded cold boxes where welding is permitted |
| Carbon steel, stainless steel, or aluminum angle — pre-drilled with pilot holes as a template, supplied in 2 segments with sealant and bolting | Casing wall or roof/floor | Required for "Standard with Ring Collar Boot" on upgrades where welding is prohibited |
| Characteristic | Details |
|---|---|
| Standard dimensions | 3.0, 4.0, 6.0, 8.0 in. OD × 1.5 in. thick |
| Custom sizes | Per special order |
| Standard material | Aluminum |
| Other materials | Per special order — PTFE, Haysite™ |
| Standard features | Bored to suit valve extension OD, then cut in half to allow installation without disassembly |
| Other features | Per special order, collars supplied with a 0.25 in. NPT tap c/w brass plug — usable for N2 or steam purge supply |
| Specification | Usage |
|---|---|
| Permanently tacky, synthetic thread reinforced butyl rubber sealant. Width: 2 in. or 1 in. Applied by hand. | Between valve extension collar ID and collar segments; between cold box casing and casing bulkhead angle ring |
| Component | Country |
|---|---|
| CSPE / Polyester material | USA |
| Design, manufacture of boot | Canada |
| Cold box casing bulkhead ring (CCBR) | Canada |
| Valve extension split collars | Canada |
| Joint tape / sealant | USA |
| SS band clamps | USA |
| Hardware for CCBR | Canada |
Expedited delivery — courier shipments via UPS, FedEx, DHL, or as advised by the client.
Larger shipments — within North America, most often by truck (air also available). International shipments typically by truck and ship (air also available).
ISPM 15 — outside North America, all wood packaging, pallets, and crates comply with International Standards for Phytosanitary Measures No. 15: bark-free wood, heat treated or fumigated with methyl bromide.
Lead time includes the time needed to design the solution and fabricate all components, and is confirmed with each quote.
Orders of 50 boot assemblies or fewer typically ship in 3 to 4 weeks. Larger orders that include cold box casing bulkhead rings may require up to 8 weeks.